Suspended Unit System
Suspended Unit Systems in Labs
Popular in Industrial Laboratory Furniture and Cleanrooms, Our suspended unit systems are designed much like our fixed unit systems as they include fixed benchtops. However, these systems are supported by C frame metalwork. This offers the ultimate flexibility and strength. The storage cabinets are fixed to the metalwork to allow for space underneath. This means they are well clear from the floor allowing easy access for cleaning. This makes this type of systems ideal for microbiological and pharmaceutical laboratories that regards cleanliness of great importance.
Service lines can again be used in the voids behind the storage cabinet. Service spines and trunking offer a variety of designs that give adequate access to worksurfaces as well as isolation of potential hazards.
Our standard specification is as follows:
Unit Construction and Finishes
Ends, rails, bottom and shelf to be constructed of 18mm White melamine faced MDF Board, edged in 2mm matching PVC. Backs are 3mm Or 8mm melamine faced MDF Board to match. Carcasses are doweled pin and cam construction. Units are fitted with 4 heavy duty adjustable feet. All backs are fully removable for easy access to services.
Drawer sides are Metabox system epoxy coated (RAL 9001 Cream – White) mild steel, mounted on soft rollered runners. Standard depth is 450mm front to back; drawer base and back are of 12mm white melamine faced MDF board, edged as necessary. Standard drawer sides are 86mm and 135mm. Capacity 50Kg Static Load, 25Kg Dynamic.
Doors and drawer fronts are of 18mm Laminate faced board. 2mm PVC lips to all edges. Colours are from the Altofina Plain Colour Laminate
Doors are to be hung on Salice UK 1700 concealed clip-on hinges.
Chrome “D” Pull type handles (100 mm)
Lowe and Fletcher 2806 Cylinder Cupboard or Drawer lock
The above can be tailored to suit your requirements.